JetSet
Vedi ordine Ordine Prima Pagina Indice Invio Commento


MULTISERIALI.....: da 2,4,8,16,32 porte con o senza processore

Codice:SCH02064

2 PORT X.25 BOARD CON V.24/RS232 INTERFACCIA C125/232

Lit. 1.647.100


CARATTERISTICHE TECNICHE


BROCHURE
[Multiport Sync Boards]
C125/C225 Intelligent X.25 Boards
Bring the World Together with X.25

[Introduction]

The X.25 standard is an internationally defined and mature
communication protocol. The X.25 network allows user to
communicate worldwide, with any other X.25 network, in a highly
reliable way. The X.25 network reduces long distance dial-up expenses,
i.e. charges are mainly based on the amount of data transferred, not
distance. It also allows multiplexing of many conversations over a
single access link. Despite new technologies being developed, the X.25
standard is still widely used.

The C125/C225 are intelligent X.25 communication boards which add Wide
Area Network (WAN) capability to the PC/AT or compatible systems. The
C125/C225 are equipped with 80286 microprocessor and provide high
speed, two-channel or four-channel sync communication links with
stream-based X.25 software. The software runs on the board and offers
a complete X.25 PAD with full X.3, X.28 and X.29 compatibility. This
relieves the host CPU of the workload of packet assembly/disassembly.

The C125/C225 bring true high performance to X.25 communications.
Speeds of up to 64K bps (RS-232 interface) or 1.544M bps (V.35
interface) are possible. Based on the advanced software drivers, the
C125/C225 support up to 64 virtual circuits per board. Maximum 4
boards, which make 256 virtual circuits, can be installed in a PC
running SCO UNIX, UNIX SVR4.2, UnixWare or DOS. The C125/C225 full
support for all features of CCITT 1988 X.25 standard.

[Specifications]

* 12MHz 80286 processor
* 2/4 X.25 ports for C125/C225
* 512K bytes dual-ported RAM accessed by a 16K bytes window
* No switch no jumper, easy configuration
* IRQ: 10, 11, 12, 15 (software configurable)
* Z85C30 Serial Communication Controller
* Optional RS-232 or V.35 interface
* Speed up to 64K bps (RS-232) or 1.544M bps (V.35, 2 ports are
equipped with DMA controller)
* Max. 4 boards per system
* 16-bit ISA (EISA compatible)
* Conform to CCITT 1988 X.25 standard
* Support CCITT X.3, X.28, X.29 PAD standard
* Support CCITT X.121 address protocol
* Max. 64 virtual circuits per board
* Support X.25 API (C languages)
* Terminal PAD, Host PAD, IP Router and Line Trace utilities (UNIX)
* Terminal Emulation, background Line Trace and Data Scope
utilities (DOS)
* Support SCO UNIX, AT&T SVR4.2, UnixWare and DOS
* Dimensions: 288mm x 108mm x 15mm
* Power requirement: 2A (+5V) 75mA (+12V) 75mA (-12V)
* Operating temp.: 0 ~ 55 degrees




Vedi ordine Prima PaginaIndice Invio Commento